Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 198)

128 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Host discovery
3
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to delete from active discovery in the Discovered Hosts table.
3. Click Delete.
4. Click OK on the confirmation message.
The deleted host displays in the Previously Discovered Addresses table.
5. Click Close on the Discover Host Adapters dialog box.
Rediscovering a host to active discovery
To rediscover a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to rediscover in the Discovered Hosts table.
3. Click Rediscover.
4. Click OK on the confirmation message.
The rediscovered host displays in the Discovered Hosts table. The discovery status is updated
dynamically.
5. Click Close on the Discover Host Adapters dialog box.
Rediscovering a previously discovered host
To return a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to return to active discovery in the Previously Discovered Addresses
table. The table displays the Network Address, Name, User ID, Discovery Type, Communication
Protocol, and Port details of the selected host.
3. Click Discover.
4. Click OK on the confirmation message.
The rediscovered host displays in the Discovered Hosts table.
5. Click Close on the Discover Host Adapters dialog box.
Deleting a host from discovery
To delete a host permanently from discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.