Viewing names – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 251
Brocade Network Advisor SAN + IP User Manual
181
53-1003155-01
Name settings
5
Viewing names
To view names associated with devices, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays (
Figure 70
).
FIGURE 70
Configure Names dialog box
2. Select All Names from the Display list.
Only devices with a name display. The table displays the following information.
•
Scope list — Select a search value (Name or WWN) from the list.
•
Search text box — Enter the name or WWN of the device for which you are searching.
•
Search button — Click to search on the value in the Search field. For more information,
refer to
“Searching for a device by name”
•
Display table — This table displays the following information:
Description–A description of the device.
Name–The name of the device. Enter a name for the device.
Operational Status–The operational status of the device (discovered, operational, and
unknown).
Type–The type of device (port, node, Fabric Assigned WWN, and unknown).
WWN–The world wide node (WWN) of the device. Enter a WWN for the device.
Click a column head to sort the list. Click a column head again to reverse the sort
order.
•
Remove button — Click to remove a device from the Display table. For more information,
refer to
“Removing a name from a device”
•
Import button — Click to import name data. For more information, refer to