Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 116)

Configuration/Programming 8-11
1503-UM054C-EN-P – June 2013
Figure 8.6 – IntelliVAC Base Bootloader Menu
The IntelliVAC base bootloader screen has four options:
1. Verify current firmware
2. Upload new firmware
3. Power on reset IntelliVAC
4. Run current firmware
Verify Current Firmware
This option performs a CRC check on the full program memory of
the IntelliVAC and compares the calculated value to the correct
value which is stored in the firmware. If the two CRCs match, then
“OK” is displayed.
Additionally this screen also checks and displays the revision
number of the firmware for reference purpose. This information is
also available in the IntelliVAC plus parameters page on DeviceNet.
Once the CRC and firmware revision are displayed a prompt to press
any key will be displayed. Pressing any key on the PC keyboard will
return the user to the main IntelliVAC base module bootloader
menu.