Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 311)

B-136 Parameters
1503-UM054C-EN-P – June 2013
Total Number of Close Operations on IB3
[IB 3 Master Counter]
Parameter Number: 265,219,173,_,_.
Access rule: Get
Data Type: UDINT
Object Mapping: 0x384-3-32
Group: Diagnostics
Units: Total number of Close operations for IB3
Minimum Value: 0
Maximum Value: 0xFFFFFF
Default Value: 0
This parameter allows the user to view the Total Number of Close
Operations that has occurred on IB3 since its initial use. This value
cannot be reset. See Master Counter in Chapter 4 for a detailed
description of this feature.
Total Number of Close Operations on IB4
[IB 4 Master Counter]
Parameter Number: 266,220,_,_,_.
Access rule: Get
Data Type: UDINT
Object Mapping: 0x384-4-32
Group: Diagnostics
Units: Total number of Close operations for IB4
Minimum Value: 0
Maximum Value: 0xFFFFFF
Default Value: 0
This parameter allows the user to view the Total Number of Close
Operations that has occurred on IB4 since its initial use. This value
cannot be reset. See Master Counter in Chapter 4 for a detailed
description of this feature.