Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 380)

DeviceNet Information E-15
1503-UM054C-EN-P – June 2013
PCP Object (Motor Control Center Object)
Class Attributes: None
Number of Instances: 1
Table E.27 – Instance Attribute
Attribute
ID
Access
Rule
Name Data Type
Data
Value
NV/CCV
1 Get/Set MCC number USINT 0 to 255 Y
2 Get/Set Vertical section number USINT 0 to 255 Y
3 Get/Set Starting section letter USINT 0 to 255 Y
4 Get/Set Space factor USINT 0 to 63 Y
5 Get/Set Cabinet width USINT 0 to 255 Y
6 Get/Set Controlled device USINT 0 to 255 Y
7 Get Number of device inputs USINT 8 Y
8 Get/Set Devices connected at input Array of USINT - Y
9 Get Number of device outputs Array of USINT 2 Y
10 Get/Set Device connected at outputs Array of USINT - Y
Table E.28 – Common Services
Service Code
Implementation for
Service Name
Class Instance
0E hex No Yes Get_Attribute_Single
10 hex No Yes Set_Attribute_Single
18 hex No Yes Get member
19 hex No Yes Set member