Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 265)

B-90 Parameters
1503-UM054C-EN-P – June 2013
Mechanical Latch Fails to Trip on IB4
[IB 4 Mechanical Latch Fail to Trip]
Parameter Number: 166,140,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-4-24
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Mechanical
Latch Fail to Trip warning from the IB4 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Mechanical Latch Fail to Trip in Chapter 4 for a
detailed description of this warning.
Mechanical Latch Fails to Trip on IB5
[IB 5 Mechanical Latch Fail to Trip]
Parameter Number: 167,_,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-24
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Mechanical
Latch Fail to Trip warning from the IB5 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Mechanical Latch Fail to Trip in Chapter 4 for a
detailed description of this warning.