Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 279)

B-104 Parameters
1503-UM054C-EN-P – June 2013
Power Up with Contactor Closed on IB2
[IB 2 Power-up with Contactor Closed]
Parameter Number: 194,162,130,98,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-29
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Power Up
with Contactor Closed fault from the IB2 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Power Up with Contactor Closed in Chapter 4 for a
detailed description of this warning.
Power Up with Contactor Closed on IB3
[IB 3 Power-up with Contactor Closed]
Parameter Number: 195,163,131,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-29
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Power Up
with Contactor Closed fault from the IB3 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Power Up with Contactor Close in Chapter 4 for a
detailed description of this warning.