Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 272)

Parameters B-97
1503-UM054C-EN-P – June 2013
Contactor Long Drop Out Time on IB3
[IB 3 Contactor Long Drop Out Time]
Parameter Number: 180,151,122,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-60
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Long Drop Out Time warning from the IB3 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Long Contactor Drop Out Time in Chapter 4 for a
detailed description of this warning.
Contactor Long Drop Out Time on IB4
[IB 4 Contactor Long Drop Out Time]
Parameter Number: 181,152,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-4-60
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Long Drop Out Time warning from the IB4 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Long Contactor Drop Out Time in Chapter 4 for a
detailed description of this warning.