Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 345)

B-170 Parameters
1503-UM054C-EN-P – June 2013
Drop Out Time Source
[Drop Out Time Source]
Parameter Number: 329,271,213,155,96.
Access rule: Get/Set
Data Type: BOOL
Object Mapping: 0xB4-1-124
Group: Diagnostics
Units: -
Minimum Value: 0 = From IB
Maximum Value: 1 = From IE
Default Value: 0
This parameter allows the user to view and set the status of the Drop
Out Time Source. If this bit is a ‘0’ then the IB DIP switch setting is
used as the Drop Out Time Source. If this bit is a ‘1’ then the IE
setting is used as the Drop Out Time Source.
Contactor Coil Current for IB1
[IB 1 Contactor Coil Current]
Parameter Number: 330,272,214,156,97.
Access rule: Get
Data Type: FLOAT
Object Mapping: 0x384-1-61
Group: Diagnostics
Units: Amperes
Minimum Value: 00.000A
Maximum Value: 99.999A
Default Value: 00.000A
This parameter allows the user to view the real time operating Coil
Current for IB1. The current will be the Hold current for Electrically
Held contactors, only, because the Close/Trip coils for Mechanically
Latched contactors are only momentary currents and are not sustained
for extended time periods. See “Coil Currents” in Chapter 4 for a
more detailed description of this feature.