Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 376)

DeviceNet Information E-11
1503-UM054C-EN-P – June 2013
Table E.22 – Instance Attributes (cont.)
Attribute
ID
Access Rule Attribute Name Data Type
Default
Value
Range
125 Get/Set Communication Loss Action BOOL 0 0=Hold
1=RESET
detail
126 Get Ready Status BOOL 0 0=FALSE
1=TRUE
127 Get/Set MC System Status UINT 0
128 Get/Set IE status word UINT 0
129 Get Running status BOOL 0 0=FALSE
1=TRUE
130 Get System locked BOOL 0 0=not active
1=active
131 Get/Set Reset All BOOL 0 0=no action
1=reset all fault and
warning
Note *:
1. The Setting of Mask is only could be done in specific condition.
The setting of Customize priority is only could be done in specific condition if Mask=2
Note**:
some bits are set to clear fault/warning
Note***:
the status is: Byte 0, IE inputs, assembly 10, byte 0
Byte 1~2: IB inputs, assembly 10, byte 5~6
Byte 3; Status, assembly 10, byte 4
Table E.23 - Common Services
Service Code
Implementation for
Service Name
Class Instance
0E hex Yes Yes Get_Attribute_Single
10 hex No Yes Set_Attribute_Single
IntelliVAC Base Module Object
This is a vendor specific class defined for IntelliVAC base module.
Table E.24 - Class Attributes
Attribute ID Access Rule Name
DeviceNet
Data Type
Data Value
1 Get Revision UINT 1
2 Get Max instance UINT 1~5, depends on the product option
Number of Instances
: 1~5, depends on the IB number