Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 357)

B-182 Parameters
1503-UM054C-EN-P – June 2013
MC System Ready Status
[MC System Ready Status]
Parameter Number: 347,286,225,164,102.
Access rule: Get
Data Type: BOOL
Object Mapping: 0xB4-1-126
Group: Diagnostics
Units: -
Minimum Value: 0 = False
Maximum Value: 1 = True
Default Value: 0
This parameter allows the user to view the Ready Status of the MC
System. If this bit is False then there is an MC System fault or
warning present. If this bit is True, then there is no MC System fault
or warning present. See Table 4.H in Chapter 4 for a detailed
description of each of the MC System Status Word bits.
MC System Running Status
[MC System Running Status]
Parameter Number: 348,287,226,165,103.
Access rule: Get
Data Type: BOOL
Object Mapping: 0xB4-1-129
Group: Diagnostics
Units: -
Minimum Value: 0 = False
Maximum Value: 1 = True
Default Value: 0
This parameter allows the user to view the Running Status of the MC
System. If this bit is False then the MC System is not running. If
this bit is True, then the MC System is running. See Table 4.H in
Chapter 4 for a detailed description of each of the MC System Status
Word bits.