Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 367)

E-2 DeviceNet Information
1503-UM054C-EN-P – June 2013
Table E.3 – Device Status
Bit No. Status Data Value
Bit 0 Owned 0=not owned
1=owned (Group 2 allocated to master)
Bit 1 Reserved Always 0
Bit 2 Configured 0= not configured
1=configured
Bit 3 Reserved Always 0
Bit 4-7 Vendor specific All 0
Bit 8 Minor cfg fault 0=no fault
1=minor configuration fault
Bit 9 Minor device fault 0=no fault
1=minor device fault
Bit 10 Major cfg fault 0=no fault
1=major configuration fault
Bit 11 Major device fault 0=no fault
1=major device fault
Bit 12,13 Reserved Always 0
Bit 14,15 Reserved Always 0
Note:
The code build number is for internal reference only;
there shall be a corresponding frozen code package.
Table E.4 - Common Services
Service
Code
Implementation for
Service Name Description of Service
Class Instance
0E hex Yes Yes Get_Attribute_Single Returns the contents of the
specified attribute.
10 hex No Yes Set_Attribute_Single Set the heartbeat value.
05 hex No Yes Reset Invokes the Reset service
for the device.
DeviceNet Object
Table E.5 - Class Attributes
Attribute ID
Access
Rule
Name
DeviceNet
Data Type
Data Value
1 Get Revision UINT 2
Number of Instances: 1