Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 293)

B-118 Parameters
1503-UM054C-EN-P – June 2013
Input Line Undervoltage during Hold on IB2
[IB 2 Line Undervoltage Hold]
Parameter Number: 224,186,148,110,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-59
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Input Line
Undervoltage during a Hold period fault from the IB2 module. If the
bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the
warning is present. See Supply Voltage in Chapter 4 for a detailed
description of this warning.
Input Line Undervoltage during Hold on IB3
[IB 3 Line Undervoltage Hold]
Parameter Number: 225,187,144,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-59
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Input Line
Undervoltage during a Hold period fault from the IB3 module. If the
bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the
warning is present. See Supply Voltage in Chapter 4 for a detailed
description of this warning.