Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 263)

B-88 Parameters
1503-UM054C-EN-P – June 2013
Invalid Command on IB5 Level
[IB 5 Invalid Command]
Parameter Number: 162,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-23
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Invalid
Command warning from the IB5 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Invalid Command in Chapter 4 for a detailed description of this
warning.
Mechanical Latch Fails to Trip on IB1
[IB 1 Mechanical Latch Fail to Trip]
Parameter Number: 163,137,111,85,58.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-24
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Mechanical
Latch Fail to Trip warning from the IB1 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Mechanical Latch Fail to Trip in Chapter 4 for a
detailed description of this warning.