Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 304)

Parameters B-129
1503-UM054C-EN-P – June 2013
Extended Close Time on IB4
[IB 4 Extended Pick up Time]
Parameter Number: 251,208,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-4-55
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Extended Pick
up Time warning from the IB4 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Contactor Close Time, Extended Close Time & Tables 4.F &
4.G in Chapter 4 for a detailed description of this warning.
Extended Close Time on IB5
[IB 5 Extended Pick up Time]
Parameter Number: 252,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-55
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of Extended Pick
up Time warning from the IB5 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Contactor Close Time, Extended Close Time & Tables 4.F &
4.G in Chapter 4 for a detailed description of this warning.