Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 42)

Description of Features 4-15
1503-UM054C-EN-P – June 2013
Time Zone Selection To facilitate in the setting of the time of day for different world time
zones, there will be a feature added, which allows the time zone of
the area where the IntelliVAC Plus will be operated, to be
programmed. This will be implemented, using DeviceNet, by
selecting the appropriate time zone from a list as follows:
‘Time Zone Selection = GMT -12:00’
‘Time Zone Selection = GMT -11:00’
‘Time Zone Selection = GMT -10:00’
‘Time Zone Selection = GMT - 9:00’
‘Time Zone Selection = GMT - 8:00’
‘Time Zone Selection = GMT - 7:00’
‘Time Zone Selection = GMT - 6:00’
‘Time Zone Selection = GMT - 5:00’
‘Time Zone Selection = GMT - 4:00’
‘Time Zone Selection = GMT - 3:30’
‘Time Zone Selection = GMT - 3:00’
‘Time Zone Selection = GMT - 2:00’
‘Time Zone Selection = GMT - 1:00’
‘Time Zone Selection = GMT - 0:00’
‘Time Zone Selection = GMT + 1:00’
‘Time Zone Selection = GMT + 2:00’
‘Time Zone Selection = GMT + 3:00’
‘Time Zone Selection = GMT + 3:30’
‘Time Zone Selection = GMT + 4:00’
‘Time Zone Selection = GMT + 4:30’
‘Time Zone Selection = GMT + 5:00’
‘Time Zone Selection = GMT + 5:30’
‘Time Zone Selection = GMT + 5:45’
‘Time Zone Selection = GMT + 6:00’
‘Time Zone Selection = GMT + 6:30’
‘Time Zone Selection = GMT + 7:00’
‘Time Zone Selection = GMT + 8:00’
‘Time Zone Selection = GMT + 9:00’
‘Time Zone Selection = GMT + 9:30’
‘Time Zone Selection = GMT +10:00’
‘Time Zone Selection = GMT +11:00’
‘Time Zone Selection = GMT +12:00’
‘Time Zone Selection = GMT +13:00’
When the time zone is read from DeviceNet, one of the above
selected time zones will be displayed.