Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 273)

B-98 Parameters
1503-UM054C-EN-P – June 2013
Contactor Long Drop Out Time on IB5
[IB 5 Contactor Long Drop Out Time]
Parameter Number: 182,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-60
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Long Drop Out Time warning from the IB5 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Long Contactor Drop Out Time in Chapter 4 for a
detailed description of this warning.
Contactor Fails to Drop Out on IB1
[IB 1 Contactor Fails To Drop Out]
Parameter Number: 183,153,123,93,62.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-27
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Fails to Drop Out fault from the IB1 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Contactor Fails to Drop Out in Chapter 4 for a detailed
description of this warning.