Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 370)

DeviceNet Information E-5
1503-UM054C-EN-P – June 2013
Parameter Object
The parameter object and parameter object are all for mainly for 193-HIM to
get online parameters.
Table E.10 - Class Attributes
Attribute
ID
Access
Rule
Name DeviceNet Data Type Data Value
1 Get Revision UINT 3
2 Get Max instance UINT 24
8 Get Parameter
Class
Descriptor
WORD 0b
Bit 0: Supports Parameter
Instances
Bit 1: Supports Full Attributes
Bit 2: Must do non-volatile
storage save command
Bit 3: Params are stored in Non-
Volatile storage
9 Get Configuration
Assembly
Instance
UINT 0
There is a set of instances reserved for IE plus module. The following instance
attributes are implemented for all parameter attributes:
Table E.11 - Class Instances
Attribute
ID
Access
Rule
Attribute Name Data Type
1 Get/Set Value Specified in descriptor
2 Get Link path size USINT
3 Get Link path Array of:
Byte
EPATH
4 Get Descriptor WORD
5 Get Data type EPATH
6 Get Data size USINT
7 Get Parameter name string Short string
8 Get Unit string Short string
9 Get Help string Short string
10 Get Min value Specified in descriptor
11 Get Max value Specified in descriptor
12 Get Default value Specified in descriptor
13 Get Scaling multiplier UINT
14 Get Scaling divisor UINT
15 Get Scaling base UINT
16 Get Scaling offset INT
17 Get Multiplier Link UINT
18 Get Divisor Link UINT
19 Get Base Link UINT
20 Get Offset Link UINT
21 Get Decimal Precision USINT