Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 290)

Parameters B-115
1503-UM054C-EN-P – June 2013
Input Line Undervoltage during Close on IB1
[IB 1 Line Undervoltage Close]
Parameter Number: 218,181,144,107,69.
Access rule: Get
Data Type: USINT
Object Mapping: 0x384-1-45
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Input Line
Undervoltage during a Close period fault from the IB1 module. If
the bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the
warning is present. See Supply Voltage in Chapter 4 for a detailed
description of this warning.
Input Line Undervoltage during Close on IB2
[IB 2 Line Undervoltage Close]
Parameter Number: 219,182,145,108,_.
Access rule: Get
Data Type: USINT
Object Mapping: 0x384-2-45
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Input Line
Undervoltage during a Close period fault from the IB2 module. If
the bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the
warning is present. See Supply Voltage in Chapter 4 for a detailed
description of this warning.