Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 36)

Description of Features 4-9
1503-UM054C-EN-P – June 2013
Items #30 to #49, in the Event Log, which apply to the DeviceLogix
I/O, will only be logged when the DeviceLogix engine is operating.
This occurs when the Logic Mask is set to #2 – DeviceLogix (see
Chapter 9). All other changes of these input states which occur
while Logic Mask is not set to #2, will not be logged to the Event
Log.
Table 4.D – Event Log Data
Event Code Data Time Stamp
Contactor #1 Closed 1 None Mnth/Date/Yr/Hr/Min/Sec/10mSec
Contactor #2 Closed 2 None “
Contactor #3 Closed 3 None “
Contactor #4 Closed 4 None “
Contactor #5 Closed 5 None “
Contactor #1 Open 6 None “
Contactor #2 Open 7 None “
Contactor #3 Open 8 None “
Contactor #4 Open 9 None “
Contactor #5 Open 10 None “
Jog Event #1 11 Byte “
Jog Event #2 12 Byte “
Jog Event #3 13 Byte “
Jog Event #4 14 Byte “
Jog Event #5 15 By te “
IE Fault 16 Fault Byte “
IE Warning 17 Warning Byte “
IE DNet Fault 18 Fault Byte “
IE DNet Warning 19 Warning Byte “
IB #1 Fault 20 Fault Byte “
IB #2 Fault 21 Fault Byte “
IB #3 Fault 22 Fault Byte “
IB #4 Fault 23 Fault Byte “
IB #5 Fault 24 Fault Byte “
IB #1 Warning 25 Warning Byte “
IB #2 Warning 26 Warning Byte “
IB #3 Warning 27 Warning Byte “
IB #4 Warning 28 Warning Byte “
IB #5 Warning 29 Warning Byte “
IN1 Close 30 None “
IN2 Close 31 None “
IN3 Close 32 None “
IN4 Close 33 None “
IN5 Close 34 None “
IN6 Close 35 None “
IN7 Close 36 None “
IN8 Close 37 None “
IN1 Open 38 None “
IN2 Open 39 None “
IN3 Open 40 None “
IN4 Open 41 None “
IN5 Open 42 None “
IN6 Open 43 None “
IN7 Open 44 None “
IN8 Open 45 None “