Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 274)

Parameters B-99
1503-UM054C-EN-P – June 2013
Contactor Fails to Drop Out on IB2
[IB 2 Contactor Fails To Drop Out]
Parameter Number: 184,154,124,94,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-27
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Fails to Drop Out fault from the IB2 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Contactor Fails to Drop Out in Chapter 4 for a detailed
description of this warning.
Contactor Fails to Drop Out on IB3
[IB 3 Contactor Fails To Drop Out]
Parameter Number: 185,155,125,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-27
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Fails to Drop Out fault from the IB3 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Contactor Fails to Drop Out in Chapter 4 for a detailed
description of this warning.