Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 235)

B-60 Parameters
1503-UM054C-EN-P – June 2013
Learn Mode Setting From IB1
[IB 1 Learn Mode Setting]
Parameter Number:
108,93,78,63,47.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-17
Group: Configuration
Units: -
Minimum Value: 0 = Off
Maximum Value: 1 = On
Default Value: 0
This parameter allows the user to view the status of the Learn Mode
setting for the IB1 module. If it is Off, then the IB1 contactor will
not try to determine the type of contactor that it is connected to. If it
is On, then the IB1 contactor will try to determine the type of
contactor that it is connected to. This feature is not functional on the
Rev 1.01 firmware release.
Learn Mode Setting From IB2
[IB 2 Learn Mode Setting]
Parameter Number: 109,94,79,64,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-17
Group: Configuration
Units: -
Minimum Value: 0 = Off
Maximum Value: 1 = On
Default Value: 0
This parameter allows the user to view the status of the Learn Mode
setting for the IB2 module. If it is Off, then the IB2 contactor will
not try to determine the type of contactor that it is connected to. If it
is On, then the IB2 contactor will try to determine the type of
contactor that it is connected to. This feature is not functional on the
Rev 1.01 firmware release.