Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 286)

Parameters B-111
1503-UM054C-EN-P – June 2013
Module not Healthy on IB1 [IB 1 Module not Healthy]
Parameter Number: 208,173,138,103,67.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-28
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Module not
Healthy fault from the IB1 module. If the bit is ‘0’ then the warning
is not present. If the bit is ‘1’ then the warning is present. See Table
4.E and related description for a detailed description of this warning.
Module not Healthy on IB2 [IB 2 Module not Healthy]
Parameter Number: 209,174,139,104,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-28
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Module not
Healthy fault from the IB2 module. If the bit is ‘0’ then the warning
is not present. If the bit is ‘1’ then the warning is present. See Table
4.E and related description for a detailed description of this warning.