Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 276)

Parameters B-101
1503-UM054C-EN-P – June 2013
Long Close Time on IB1 [IB 1 Long Close Time]
Parameter Number: 188,157,126,95,63.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-54
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Long Close
Time warning from the IB1 module. If the bit is ‘0’ then the warning
is not present. If the bit is ‘1’ then the warning is present. See
Extended Close Time in Chapter 4 for a detailed description of this
warning.
Long Close Time on IB2 [IB 2 Long Close Time]
Parameter Number: 189,158,127,96,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-54
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Long Close
Time warning from the IB2 module. If the bit is ‘0’ then the warning
is not present. If the bit is ‘1’ then the warning is present. See
Extended Close Time in Chapter 4 for a detailed description of this
warning.