Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 264)

Parameters B-89
1503-UM054C-EN-P – June 2013
Mechanical Latch Fails to Trip on IB2
[IB 2 Mechanical Latch Fail to Trip]
Parameter Number: 164,138,112,86,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-24
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Mechanical
Latch Fail to Trip warning from the IB2 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Mechanical Latch Fail to Trip in Chapter 4 for a
detailed description of this warning.
Mechanical Latch Fails to Trip on IB3
[IB 3 Mechanical Latch Fail to Trip]
Parameter Number: 165,139,113,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-3-24
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Mechanical
Latch Fail to Trip warning from the IB3 module. If the bit is ‘0’ then
the warning is not present. If the bit is ‘1’ then the warning is
present. See Mechanical Latch Fail to Trip in Chapter 4 for a
detailed description of this warning.