Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 271)

B-96 Parameters
1503-UM054C-EN-P – June 2013
Contactor Long Drop Out Time on IB1
[IB 1 Contactor Long Drop Out Time]
Parameter Number: 178,149,120,91,61.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-60
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Long Drop Out Time warning from the IB1 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Long Contactor Drop Out Time in Chapter 4 for a
detailed description of this warning.
Contactor Long Drop Out Time on IB2
[IB 2 Contactor Long Drop Out Time]
Parameter Number: 179,150,121,92,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-2-60
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Contactor
Long Drop Out Time warning from the IB2 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Long Contactor Drop Out Time in Chapter 4 for a
detailed description of this warning.