Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module User Manual

Page 292

Advertising
background image

Parameters B-117

1503-UM054C-EN-P – June 2013


Input Line Undervoltage during Close on IB5
[IB 5 Line Undervoltage Close]

Parameter Number:

222,_,_,_,_.

Access rule:

Get

Data Type:

USINT

Object Mapping:

0x384-5-45

Group:

Diagnostics

Units:

-

Minimum Value:

0 = Not Present

Maximum Value:

1 = Present

Default Value:

0

This parameter allows the user to view the status of the Input Line

Undervoltage during a Close period fault from the IB5 module. If

the bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the

warning is present. See Supply Voltage in Chapter 4 for a detailed

description of this warning.


Input Line Undervoltage during Hold on IB1
[IB 1 Line Undervoltage Hold]

Parameter Number:

223,185,147,109,70.

Access rule:

Get

Data Type:

BOOL

Object Mapping:

0x384-1-59

Group:

Diagnostics

Units:

-

Minimum Value:

0 = Not Present

Maximum Value:

1 = Present

Default Value:

0

This parameter allows the user to view the status of the Input Line

Undervoltage during a Hold period fault from the IB1 module. If the

bit is ‘0’ then the warning is not present. If the bit is ‘1’ then the

warning is present. See Supply Voltage in Chapter 4 for a detailed

description of this warning.

Advertising