Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 305)

B-130 Parameters
1503-UM054C-EN-P – June 2013
Average Number of Operations per Time Unit on IB1
[IB 1 Average Operations per Time Unit]
Parameter Number: 253,209,165,121,76.
Access rule: Get/Set
Data Type: USINT
Object Mapping: 0x384-1-43
Group: Diagnostics
Units: -
Minimum Value: 0
Maximum Value: 2
Default Value: 0
This parameter allows the user to view and set the status of the
Average Number of Operations per Unit Time for IB1. The Time
Unit is used to set the period over which the Average number of
Operations is to be calculated for. See “Average Operations”
Counter in Chapter 4 for a detailed description of this feature.
Table B.33 – Time Unit for Average # Close Operators for IB1
Value Enum Text Description
0 Hour Average Close operations per Hour for IB1
1 Day Average Close operations per Day for IB1
2 Week Average Close operations per Week for IB1
Average Number of Operations on IB1
[IB 1 Average Operations Value]
Parameter Number: 254,210,166,111,77.
Access rule: Get
Data Type: UDINT
Object Mapping: 0x384-1-44
Group: Diagnostics
Units: Avg. # of Close operations per unit time
Minimum Value: 0
Maximum Value: 0xFFFFFF
Default Value: 0
This parameter allows the user to view the status of the Average
Number of Close Operations, for IB1, as measured per the Unit Time
set in parameter #253. The Time Unit is used to set the period over
which the Average number of Operations, for IB1, is to be calculated
for. See “Average Operations” Counter in Chapter 4 for a detailed
description of this feature.