Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module User Manual
Page 295
B-120
Parameters
1503-UM054C-EN-P – June 2013
Input Line Overvoltage on IB1 [IB 1 Line Overvoltage]
Parameter Number:
228,189,150,111,71.
Access rule:
Get
Data Type:
USINT
Object Mapping:
0x384-1-46
Group:
Diagnostics
Units:
-
Minimum Value:
0 = Not Present
Maximum Value:
1 = Present
Default Value:
0
This parameter allows the user to view the status of the Input Line
Overvoltage fault from the IB1 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Supply Voltage in Chapter 4 for a detailed description of this
warning.
Input Line Overvoltage on IB2 [IB 2 Line Overvoltage]
Parameter Number:
229,190,151,112,_.
Access rule:
Get
Data Type:
USINT
Object Mapping:
0x384-2-46
Group:
Diagnostics
Units:
-
Minimum Value:
0 = Not Present
Maximum Value:
1 = Present
Default Value:
0
This parameter allows the user to view the status of the Input Line
Overvoltage fault from the IB2 module. If the bit is ‘0’ then the
warning is not present. If the bit is ‘1’ then the warning is present.
See Supply Voltage in Chapter 4 for a detailed description of this
warning.