Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module User Manual
Page 117
Advertising
8-12
Configuration/Programming
1503-UM054C-EN-P – June 2013
Figure 8.7 – IntelliVAC Base Programming Completed
Upload New Firmware
The upload new firmware option allows the application firmware of
the IntelliVAC to be updated to a new version. The file should be
provided by Rockwell technical support only.
When the “Upload new firmware “option is selected a prompt will
appear to begin an X-MODEM-CRC transfer. The user must:
Click on the “Transfer” menu in the upper right of the Hyper
Terminal screen
Select “send file”
When the dialog box opens select “Xmodem” in the protocol drop
down box
Select browse and select the firmware file provided by Rockwell
technical support
Select “send”
Advertising