Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 350)

Parameters B-175
1503-UM054C-EN-P – June 2013
Status Word for IB3 [IB 3 Status Word]
Parameter Number: 337,278,219,_,_.
Access rule: Get
Data Type: WORD
Object Mapping: 0x384-3-62
Group: Diagnostics
Units: -
Minimum Value: 0
Maximum Value: 0xFFFF
Default Value: 0
This parameter allows the user to view the IB3 Status Word. If a bit
is ‘0’ then the fault or warning is not present. If a bit is a ‘1’ then the
fault or warning is present.
Table B.41 – Status Word for IB3
Bit Enum Text Description
0 Bit 0: unused unused
1 Bit 1: unused unused
2 Bit 2: unused unused
3 Bit 3: Power Up with Contactors Closed Power Up with Contactor Closed IB3
4 Bit 4: Open Coil Open Trip Coil Open on IB3
5 Bit 5: Close Coil Open Close Coil Open on IB3
6 Bit 6: Power Up with Invalid DIPs Power Up with Invalid DIPs on IB3
7 Bit 7: MC Malfunction MC Malfunction on IB3
8 Bit 8: Drop Out During Hold Drop Out During Hold on IB3
9 Bit 9: Contactor Fails to Drop Out Contactor Fails to Drop Out on IB3
10 Bit 10: Power Up with Close Command Power Up with Close Command on IB3
11 Bit 11: Long Close Time Long Close Time on IB3
12 Bit 12: Undervoltage with Close Command Present Undervoltage with Close Command Present on IB3
13 Bit 13: Long Drop Out Time
Long Drop Out Time on IB3
14 Bit 14: Mechanical Latch Trip Fail Mechanical Latch Trip Fail on IB3
15 Bit 15: Invalid Command Invalid Command on IB3