Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 278)

Parameters B-103
1503-UM054C-EN-P – June 2013
Long Close Time on IB5 [IB 5 Long Close Time]
Parameter Number: 192,_,_,_,_.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-5-54
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Long Close
Time warning from the IB5 module. If the bit is ‘0’ then the warning
is not present. If the bit is ‘1’ then the warning is present. See
Extended Close Time in Chapter 4 for a detailed description of this
warning.
Power Up with Contactor Closed on IB1
[IB 1 Power-up with Contactor Closed]
Parameter Number: 193,161,129,97,64.
Access rule: Get
Data Type: BOOL
Object Mapping: 0x384-1-29
Group: Diagnostics
Units: -
Minimum Value: 0 = Not Present
Maximum Value: 1 = Present
Default Value: 0
This parameter allows the user to view the status of the Power Up
with Contactor Closed fault from the IB1 module. If the bit is ‘0’
then the warning is not present. If the bit is ‘1’ then the warning is
present. See Power Up with Contactor Close in Chapter 4 for a
detailed description of this warning.