Rockwell Automation 1503VC IntelliVAC Plus Contactor Control Module - Manual (Page 384)

Appendix
F
1503-UM054C-EN-P – June 2013
IntelliVAC Plus Firmware
Introduction
In order to update the firmware of the IntelliVAC Plus module using
DeviceNet you will need the following:
1. Personal computer equipped with a DeviceNet interface such as
a 1784-PCD or 1770-KFD
2. IntelliVAC Plus Event Browser Software
3. A functioning DeviceNet network including 24VDC DeviceNet
power supply
Browsing the Events:
• Start the IntelliVAC Plus Event Browser Software
•
Select a DeviceNet driver
Figure F.1 – DeviceNet Driver Selection