Adobe Premiere Pro CC v.7.xx - Manual (Page 488)

Balance Gain
Balance Angle
To the top
(intensity). The intensity can be fine-tuned by moving the Balance Gain handle.
Affects the relative coarseness or fineness of the Balance Magnitude and Balance Angle adjustment. Keeping the perpendicular
handle of this control close to the center of the wheel makes the adjustment very subtle (fine). Moving the handle toward the outer ring makes the
adjustment very obvious (coarse).
Shifts the video color toward a target color. Moving the Balance Magnitude circle toward a specific hue shifts the color
accordingly. The intensity of the shift is controlled by the combined adjustment of the Balance Magnitude and Balance Gain.
Color correction adjustments using the color wheel
A. Hue Angle B. Balance Magnitude C. Balance Gain D. Balance Angle
The Saturation slider controls the color saturation in the video. Moving the slider to 0 desaturates the image so only the luminance values show
(an image made up of white, grays, and black). Moving the slider to the right increases the saturation.
Desaturated image (left); Saturated image (right)
Adjust color balance and saturation
Although the following procedure uses the color wheel adjustments. The same adjustments can be made by entering numeric values or using the
slider controls in the Fast Color Corrector and Three-way Color Corrector effects.
1. Set up your workspace for color correction.
2. Select the clip in a Timeline panel and apply either the Fast Color Corrector or the Three-way Color Corrector effect. See also Apply effects
491