Adobe Premiere Pro CC v.7.xx - Manual (Page 98)

Enable Devices
Buffersize
Device 32-bit Recording/Playback
Note:
To the top
Note:
1. Choose Edit > Preferences > Audio Hardware (Windows) or Premiere Pro > Preferences > Audio Hardware (Mac OS), and set the following
options:
Select an output device from the Default Device menu.
Select a buffer size from the Buffersize menu (Mac OS).
2. Click OK.
Audio Hardware Settings (Windows only)
When you click ASIO Settings in the Audio Hardware panel of the Preferences dialog box, Premiere Pro opens the Audio Hardware Settings dialog
box, which contains an Input tab, and an Output tab.
Determines which connected audio device is routed into and out of Premiere Pro. If the device is an ASIO device, select the
ASIO drivers for the device. If the sound card does not have manufacturer-supplied ASIO drivers, choose Premiere Pro WDM Sound for this
setting. To enable a device, be sure to install an up-to-date driver for the device (Windows.) If you want to input more than two stereo channels or
monitor 5.1 surround audio, the device driver must comply with the ASIO (Audio Stream Input Output) specification. If it does not, only stereo
inputs and outputs are available, regardless of the number of hardware inputs and outputs that are connected.
Specifies the size of the buffer, in kilobytes, that Premiere Pro uses for recording audio.
On the Input tab, check Device 32-bit Recording to record audio in 32-bit samples. On the Output tab, check
Device 32-bit Playback to enable 32-bit playback.
If you have trouble hearing audio, see the TechNote: “No sound during playback of video or audio clips.”
Set up a USB microphone (Mac OS)
1. In the Audio Midi Setup application in Utilities, go to Audio > Open Aggregate Device Editor.
2. Check each of the following:
Your USB microphone.
An additional input device, for example, Line In.
An output device
3. Select this new aggregate device within Premiere Pro's Audio Hardware Preference panel.
Specify ASIO device settings (Windows only)
1. Choose Edit >Preferences > Audio Hardware.
2. Click ASIO settings. Specify the ASIO settings for the selected device.
The device and driver you use determine the settings in this dialog box, not Adobe Premiere Pro. See the documentation for the
ASIO device and driver you use.
3. In the Audio Hardware Settings dialog box, select the Input tab.
101