Adobe Premiere Pro CC v.7.xx - Manual (Page 96)

Note:
To the top
Native serial device control is available in Windows only.
4. Connect the deck or camcorder to the television monitor with component video cables and to amplified speakers with RCA audio cables.
5. Put the camcorder or deck into VTR or Play mode.
6. In Premiere Pro, select File >New > Sequence.
7. In the Available Presets area of the New Sequence dialog box, select the SDI or component preset that matches the format of your source
footage. Premiere Pro does not provide these presets. Manufacturers of SDI cards, component capture cards, and other devices provide
these presets. The presets must be installed with those cards and devices.
8. Type a name in the Sequence Name box. Then click OK.
Set up a file-based system
File-based system
A. Card reader, drive, or camcorder for P2, XDCAM HD, XDCAM EX, or AVCHD media B. Computer and computer monitor C. Audio cables
running to speakers or amplifier D. Speakers E. TV monitor F. BNC connectors for component or SDI video cables to TV monitor (alternative to
“G”) G. HDMI connector for audio-video cable to TV monitor (alternative to “F”)
With this setup, you can import or transfer audio and video files from card readers, drives, or tapeless camcorders recorded in any of the following
digital video file formats:
Panasonic P2
XDCAM HD
XDCAM EX
AVCHD
AVC-I
You can also preview video on a high-definition TV monitor, if your computer has one of the following:
a high-definition capture card,
a display card with component, SDI or HDMI outputs.
1. Connect the card reader, disk drive, or camcorder to the computer, typically with a USB 2.0 cable. Check the manual for your device for
details.
2. Connect the output of the computer sound card to computer speakers or audio amplifier.
3. Connect the video outputs from the capture card, breakout box, or display card to the TV monitor using component, SDI, or HDMI cables.
99