Adobe Premiere Pro CC v.7.xx User Manual

Page 512

Advertising
background image

Freq (1-3)

Reduction (1-3)

Filter (1-3)

MaxLevel

CursorMode

To the top

Determines the center frequency of each of the notch filters.

Sets the input gain level at which the color red appears in the meter for a given track.

Activates the corresponding filter bank.

Determines the gain reduction of each notch filter, thus controlling the amount of noise removed from the signal.

Activates the adjustment of the filter frequency by the cursor.

Swap Channels effect

The Swap Channels effect switches the placement of the left and right channel information. Apply to stereo clips only.

Treble effect

The Treble effects lets you increase or decrease higher frequencies (4000 Hz and above). The Boost control specifies the amount, measured in
decibels, to increase or decrease. This effect is available for 5.1, stereo, or mono clips.

Volume effect

Use the Volume effect in place of the Fixed Volume effect if you want to render Volume before other Standard effects. The Volume effect creates
an envelope for a clip so that you can increase the audio level without clipping. Clipping occurs when the signal exceeds the dynamic range that’s
acceptable for your hardware, often resulting in distorted audio. Positive values indicate an increase in volume; negative values indicate a
decrease in volume. The Volume effect is available for clips only in 5.1, stereo, or mono tracks.

Audio crossfade transitions

See also Working with audio transitions.

Constant Gain transition

The Constant Gain crossfade changes audio at a constant rate in and out as it transitions between clips. This crossfade can sometimes sound
abrupt.

Constant Power transition

The Constant Power crossfade creates a smooth, gradual transition, analogous to the dissolve transition between video clips. This crossfade
decreases audio for the first clip slowly at first and then quickly toward the end of the transition. For the second clip, this crossfade increases audio
quickly at first and then more slowly toward the end of the transition.

Exponential Fade transition

515

Advertising
This manual is related to the following products: