Wcc3.exe screen descriptions – WattMaster WM-WCC3-TGD-01B User Manual

Page 187

Advertising

WCC III Technical Guide

3-73

WCC3.EXE SCREEN DESCRIPTIONS

Satellite #: ____

Specifi es the number of the satellite you are currently editing.
If you would like to edit a different satellite, simply position the
cursor to this fi eld by using the cursor positioning (arrow) keys,
enter the desired satellite number, and press

<Enter>

Trend Log #: ____

This fi eld actually contains two separate fi elds. The fi rst fi eld
specifi es the point “type” (i.e., analog input, control output, analog
output, etc.) and displays the current type in textual form. Because
this is a “choice” fi eld, the list of available choices will be displayed
at the bottom of the screen:

<ANALOG INPUT, CONTROL OUTPUT, ANALOG OUTPUT,

TREND LOGGING, LOGIC SWITCH, BINARY OUTPUT>

Make your selection by pressing the

<space bar>

once for each

choice until the desired point type has been selected and then
press

<Enter>

. (If you select a point type that is different than that

currently being displayed, the screen will be rewritten with the
appropriate screen and data.)

The second fi eld specifi es the point number to edit. For the Trend
Log Screen, this number can range from one to eight. If you would
like to edit a different point, simply position the cursor to this fi eld
by using the cursor positioning (arrow) keys, enter the desired
point number, and press

<Enter>

of Type:

Specifi es which of the four available trend logging modes (analog
peak, analog trend, change-of-state, and run time) you wish to use.
Because this is a “choice” fi eld, the list of available choices will be
displayed at the bottom of the screen:

<ANALOG TREND, ANALOG PEAK, CHANGE OF STATE,

RUN TIME>

Make your selection by pressing the

<space bar>

once for each

choice until the desired mode has been selected, and then press

<Enter>

. (When you select a trend logging mode that is different

than that currently being displayed, the screen will be rewritten
with the appropriate screen and data.)

Satellite # 1

TREND LOGGING # 1 of Type: ANALOG TREND

Records value of: A1

S1-A1

Starting at: *:* on */*

once every: 15 Minutes

Reset by: .... being ON

Roll after 48 readings