WattMaster WM-WCC3-TGD-01B - Manual (Page 493)

11. WCC III ALARMING
WCC III Technical Guide 11-11
Operator
All WCC3 users or “Operators” should have their name entered
in this fi eld. This is for security purposes, as each specifi c operator
of the WCC3 system should have his or her Operator’s Name and
“Code” and then enter them in the space provided. This “Operator”
fi eld on the WCC3 System Parameters Screen is limited to 16 total
characters. Please note that all of this “Operator Log in” information
is kept track of in the WCC3 system log.
Code
This code is short for “Passcode” which is a numerical value of
000000000 to 9999999999. This is for security purposes, as each
specifi c operator of the WCC3 system should have his or her
Operator’s Name and “Code” and then enter them in the space
provided. This “Code” fi eld on the WCC3 System Parameters
Screen is limited to 10 total characters.
Time Out
The time out is the time in minutes before the WCC3 program will
automatically sign you out after you have not moved the mouse or
pressed a key on the keyboard. All password levels are returned to
a password level 0.
Local Print:
This function is a carry over from the old WCC2 system and is not
used on the WCC3 system.
System Parameters Screen