WattMaster WM-WCC3-TGD-01B - Manual (Page 407)

WCCUTILITY.EXE SCREENS
WCC III Technical Guide 5-25
BACKUP SELECTIVES
If you would like to perform a selective backup of certain fi les,
select
<Backup Selectives> from the WccUtility Menu.
You can select the following fi les by placing a checkmark in the
box next to the fi lename: Global Analog, Global Binary, Week
Schedules, Optimal Start, Shed Restore, Duty Cycle, Energy
Consumption, Holiday Schedule, Proportional Reset, System
Parameters, Alarm Messages, Status Messages, Unit Messages,
Network Information, and PID Programs.
Backup to disk path:
Type in the name of the path - directory and/or subdirectory that
you wish to backup the satellite data to. If you need to search for
the directory, select
<Get Path> .
Get Path:
Select the <Get Path> button to search for the directory and/or
subdirectory that you wish to backup the satellite data to. Select
<Open> to have the path appear in the Backup to disk path
fi eld.
Filename:
Change the fi lename or it will default to WCC3SELECTIVES. If
you do not change this name, it may be impossible to tell what
selectives were backed up.
Start to Backup:
Select this button to start backing up the data to the disk. The
system will automatically backup the data in a fi le called
WCC3SELECTIVES.XML unless the fi lename has been changed.
This will take several minutes. When the backup is complete, there
will be a “fi nished!!” message in one of the fi elds.
If there is already an .XML fi le with the same name, the earlier
.XML fi le will change to a .BAK fi le.
Select <Exit> to return to the WCC Utility Screen.
Backup Selectives Screen