WattMaster WM-WCC3-TGD-01B - Manual (Page 801)

Operator Interface
VAV/Zone Controller Technical Guide
33
Appendix
VAVZ II Controller
WattMaster Controls, Inc. has a new VAV Zone Controller available. This
VAVZ II Controller is an application-specifi c controller. Please see each
application-specifi c manual for the exact input and output confi guration
of the specifi c application that you are controlling.
This VAVZ II controller is generally used on all new VAV type box
control. This controller will also work with the new LCD digital
sensors (OE217-01) as well as the older Orion series of modular jack
thermistor type fl ushmount sensors (OE210-01, OE211-01, OE212-01,
and OE213-01).
There is a optional relay expansion board available for this VAVZ II
assembly.
There is an optional conduit adaptor that snaps on the end of the VAVZ
II controller for applications that require conduit fi ttings.
The part numbers are as follows:
VAVZ II Controller - OE324-23-VAVZ •
VAVZ II Pressure Independent Assembly - OE744-32-VAVZ •
with OE274 Air Sensor and pickup tubes
VAVZ II Pressure Dependent Assembly - OE742-32-VAVZ •
Figure 21: VAVZ II Controller with Standard Depluggable Power and Communications Type Connectors