WattMaster WM-WCC3-TGD-01B - Manual (Page 485)

11. WCC III ALARMING
WCC III Technical Guide 11-3
Satellite SOS Alarm
If the Master Communications Device loses communications
with a satellite controller, a Satellite SOS Alarm on the Satellite
Summary Screen will state which satellite is out of service.
TUC TOS Alarm
If for some reason the SAT3C/D/F controller loses communications
with its loop of TUC controllers, then the Satellite will report
back to the WCC III – MCD that there are TUCs OFF SYSTEM
with a TOS alarm on the Satellite Summary Screen. There is a
series of minus’s (-) and asterisks (*) that show which TUCs
are communicating. The minus’s (-) represent missing or non-
existent TUCs and the asterisks (*) are TUCs that are currently
communicating.
WCC III Auto System Logging
The WCC III auto system logging features are logged by the
Backtask.exe program, and these log fi les are then stored on the
hard drive of the WCC III - MCD. These log fi les may then be
retrieved by using the WCCUtility.exe program. The WCC III
automatic system logging features are defi ned as the following:
System Log, Alarm Log, Data Log, Acknowledge Alarms Log,
System Event Log, and MCD Comm Error Log. These log fi les
are described in detail in Section 5.
WCC III System Log
The WCC III system will automatically log the operator ID,
IP address, time, and date when an operator signs on or off the
system.
WCC III System Alarm Log
The WCC III System will automatically log an alarm, the alarm
type, and the date and time at which the alarm occurred.
WCC III System Data Log
The WCC III System will automatically log any data point that
has been changed or overridden, the logged in operator ID that
changed it, and the date and time that it was changed.
WCC III System Acknowledge Alarm
Log
The WCC III System will automatically log all alarms that have
been acknowledged, the logged in operator ID that acknowledged
the alarm(s), and the time and date of the acknowledgement.
WCC III System Event Log
The WCC III System will automatically log system events such as
new connections through the internet, when a internet connection
is closed, E-mails sent out, and satellites found or lost on the Comm
loop.
WCC III MCD Communication Error Log
The WCC III System will automatically log all communication
errors between the MCD and the satellites on the communication
loop.
Alarm Logs