WattMaster WM-WCC3-TGD-01B - Manual (Page 417)

WCCUTILITY.EXE SCREENS
WCC III Technical Guide 5-35
ProportionalReset.dat
This data fi le contains all of the actual data that is used in the user-
programmable data fi elds for all 160 of the WCC III Proportional
Program Screens.
ShedRestoreSchedule.dat
This data fi le contains all of the actual data that is used in the user-
programmable data fi elds for all 10 of the WCC III Shed/Restore
Program Screens.
StatusMessage.dat
This data fi le contains all 30 of the user-programmable “On/
Off Messages” that are displayed in the WCC III ON/OFF/Unit
Messages Screen.
SystemParameter.dat
This data fi le contains all of the actual data that is used in the
user-programmable data fi elds for all 4 of the WCC III System
Parameter Screens.
Table.dat
This fi le is created when you rebuild SAT tables. This is one of the
most important fi les on the WCC III - MCD System. The Table.
dat fi le knows how each and every setpoint within each Satellite
is to be controlled by various Week Schedules, Binary Globals,
Optimal Starts, etc.
Table.bak
This fi le is created when the BackTask.exe program rewrites the
Table.dat fi le. This is a carry over from the “old” DOS based WCC
System. The Table.bak fi le knows how each and every setpoint
within each Satellite is to be controlled by various Week Schedules,
Binary Globals, Optimal Starts, etc. If for any reason the Table.dat
fi le is corrupted, the BackTask.exe fi le will then use this Table.bak
fi le to recreate the last good Table.dat fi le.
BackTask Created Files
TenantOverride.dat
This data fi le contains all of the actual data that is used in the
user-programmable data fi elds for all 500 of the WCC III Tenant
Override Screens.
UnitMessage.dat
This data fi le contains the actual user-programmable “Unit of
Measure Messages” that are displayed in the WCC III ON/OFF/
Unit Messages Screen.
WeekSchedule.dat
This data fi le contains all of the actual data that is used in the user-
programmable data fi elds for all 128 of the WCC III Week Schedule
Screens.
“CUSTOM SLIDE”.dat
This data fi le contains all of the actual data that is used in the user-
programmable data fi elds for all 60 of the WCC Custom Screens.
The name of the “CUSTOM SLIDE”.dat fi le must exactly match
the name of the text fi le (“CUSTOM SLIDE”.TXT) that is custom
created by the end user or contractor. This is an easily created non-
picture based screen.
“BIT MAP”.dat
This data fi le contains all of the actual data that is used in the user-
programmable data fi elds for all 60 of the WCC BitMap Screens.
The name of the “BIT MAP”.dat fi le must exactly match the name
of the bit mapped fi le (“BIT MAP”.bmp) that is custom created by
the end user or contractor. This is an easily created picture-based
screen.