WattMaster WM-WCC3-TGD-01B - Manual (Page 48)

I. INTRODUCTION
WCC III Technical Guide I-26
VAVZ II Controller
VAVZ II Controller
WattMaster Controls, Inc. has a new VAV Zone Controller
available. This VAVZ II Controller is an application-specifi c
controller. Please see each application-specifi c manual for the
exact input and output confi guration of the specifi c application that
you are controlling.
This VAVZ II controller is generally used on all new VAV type box
control. This controller will also work with the new LCD digital
sensors (OE217-01) as well as the older Orion series of modular
jack thermistor type fl ushmount sensors (OE210-01, OE211-01,
OE212-01, and OE213-01).
There is a optional relay expansion board available for this VAVZ
II assembly.
There is an optional conduit adaptor that snaps on the end of the
VAVZ II controller for applications that require conduit fi ttings.
The part numbers are as follows:
• VAVZ II Controller - OE324-23-VAVZ
• VAVZ II Pressure Independent Assembly - OE744-32-VAVZ
with OE274 Air Sensor and pickup tubes
• VAVZ II Pressure Dependent Assembly - OE742-32-VAVZ
Figure I-21: VAVZ II Controller with Standard Depluggable Power and Communications Type Connectors