Metrohm tiamo 2.4 (process analysis) - Manual (Page 1007)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 991
[New]
Open the dialog window External measured value # in which the
parameters for the external measured value can be entered (see Chapter
5.6.3.11.2, page 934).
[Properties]
Open the dialog window External measured value # in which the
parameters for the external measured value can be edited (see Chapter
5.6.3.11.2, page 934).
[Delete]
Delete the external measured value selected in the table.
5.6.4.6.6 MEAS Upol - Fixed endpoint evaluation #
Dialog window: Method ▶ MEAS Upol ▶ Properties... ▶ Additional evalua-
tions ▶ Fixed endpoint evaluation ▶ [New]/[Property] ▶ Fixed endpoint evalua-
tion #
Measured quantity
Selection of the fixed measured quantity to which the associated values
for the other quantities are to be interpolated from the list of measured
points.
Selection Measured value | Time
Default value Measured value
Fixed value
Value of the fixed endpoint.
Measured value
Input range
-200.0 - 200.0 µA
Time
Input range
0.0 - 999999.9 s
5.6.4.7 MEAS T
5.6.4.7.1 MEAS T - Overview
Dialog window: Method ▶ MEAS T ▶ Properties... ▶ MEAS T - 'Command name'
Command for temperature measurements.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 901, 902,
904, 905, 906, 907