Metrohm tiamo 2.4 (process analysis) - Manual (Page 1497)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1481
6.11.3 Sample solutions (TC conductivity) properties
6.11.3.1 Editing properties
Dialog window: Configuration ▶ Sample solutions (TC conductiv-
ity) ▶ [Edit] ▶ Properties… ▶ Sample solution (TC conductivity)
The parameters for the selected line are defined on the following tabs:
￭ General
General properties.
￭ TC data
Data for TC determination and monitoring.
6.11.3.2 Properties - General
Tab: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Proper-
ties... ▶ Sample solution (TC conductivity) ▶ General
Name
Name of the measuring solution for which the temperature coefficient for
conductivity is determined.
Entry 50 characters
Default value 'empty'
Comment
Comments on the measuring solution.
Entry 500 characters
Default value 'empty'
6.11.3.3 Properties - TC data
Tab: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Proper-
ties... ▶ Sample solution (TC conductivity) ▶ TC data
Start temperature
Temperature at the start of the measurement.
Input range -20.0 - 150.0 °C
Default value 20.0 °C
Stop temperature
Temperature at end of the measurement.
Input range -20.0 - 150.0 °C
Default value 40.0 °C
TC min.
Minimum temperature coefficient in the temperature interval of the Che-
byshev function, with reference to a temperature of 25 °C.