Metrohm tiamo 2.4 (process analysis) - Manual (Page 1331)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1315
Multi-port valve
Multi-port valve
Select the MSB connector the multi-port-valve is connected to.
Selection 1 | 2 | 3 | 4
Default value 1
Port
Select the target port to be switched to.
Input range 1 - 12
Default value 1
Shift direction
Select the direction in which the valve moves to the target port.
Selection ascending | descending | automatic | not over
Default value automatic
ascending
The valve moves towards the target port in ascending direction.
descending
The valve moves towards the target port in descending direction.
automatic
The valve determines the shortest path to the target port on its own.
not over
The valve moves towards the target port in such a way that the port
specified in the parameter Not over will not be traversed.
Not over
Select that port which is not to be traversed when the port is changed.
This parameter can only be edited for Shift direction = not over.
Input range 1 - 12
Default value 1
5.6.11.8 CONTROL
5.6.11.8.1 CONTROL- Overview
Dialog window: Method ▶ CONTROL ▶ Properties... ▶ CONTROL - 'Command
name'
Command for controlling Beckhoff instruments.
Instruments
This command can be executed with the following devices:
IO Controller