Metrohm tiamo 2.4 (process analysis) - Manual (Page 981)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 965
Measured value (Titrando, 867, 855)
Input range
-2000.0 - 2000.0 mV
Measured value (Titrino)
Input range
-2000 - 2000 mV
Time
Input range
0.0 - 999999.9 s
5.6.4.5 MEAS Ipol
5.6.4.5.1 MEAS Ipol - Overview
Dialog window: Method ▶ MEAS Ipol ▶ Properties... ▶ MEAS Ipol - 'Command
name'
Command for voltametric measurements with selectable polarization
current.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 851, 852, 857, 888, 890, 901, 904,
905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
pH/Ion - Meter: 867
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command MEAS Ipol are configured on the fol-
lowing 4 tabs:
￭ General/Hardware
Parameters for devices, sensors and stirrers.
￭ Measuring parameters
Parameters for setting the measurement procedure.
￭ Evaluations
Defining further methods for evaluating measurement curves.