Metrohm tiamo 2.4 (process analysis) - Manual (Page 269)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 253
Draw in mean value
on | off (Default value: on)
If this check box activated, then the Mean value will be shown on the
control chart as a continuous line in the color of the measured value.
Draw in standard deviation
on | off (Default value: on)
If this check box is activated, then the two values Mean value + Abso-
lute standard deviation and Mean value - Absolute standard devi-
ation will be shown on the control chart as dotted lines in the color of
the measured value.
4.4.2.2.5 Control chart template - Comment
Dialog window: Database ▶ Tools ▶ Templates ▶ Control chart templates... ▶ Con-
trol chart templates ▶ [Properties] ▶ Properties - Control chart - 'Name'
Entry of comment on the control chart template.
Comment
Comment on control chart.
Entry 1000 characters
4.4.3 Curve overlay templates
4.4.3.1 Manage curve overlay templates
Menu item: Database ▶ Tools ▶ Templates ▶ Curve overlay templates
With the menu item Tools, Templates, Curve overlay templates the
dialog window Curve overlay templates opens in which the globally
available templates for curve overlay can be managed.
Template table
The table with the defined templates cannot be edited, although it can be
sorted according to the selected column in increasing or decreasing
sequence by clicking on the column title
Template name
Shows the name of the template.
Command type
Shows the command type for which the template can be used.
Comment
Shows the comments about the template.