Metrohm tiamo 2.4 (process analysis) - Manual (Page 95)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 79
NOTE
Only the integral part is used for all parameters.
A variable of the type Date/Time cannot be transferred as a parameter
here.
Both for the automatic and explicit conversion of a Time to the type
Number, the number of days are counted since December 30, 1899
at 01 hours.
Attention: December 30, 1899 01 hour = 0.00000 days, this number
is rounded off to 5 decimal places, but a relational operation for exam-
ple is carried out with the exact value!
Return value
Date/Time in the format yyyy-mm-dd hh:mm:ss UTC ±xx
NOTE
UTC = Universal Time , from which the times in the various time zones
of the earth are derived. CET (Central European Time) is equal to UTC
plus 1 hour, in the summer time UTC plus 2 hours.
Examples
Time(2004;06;02;10;30;25) = 2004-06-02 10:30:25 UTC +2
(dependent on the system time)
Time('CV.TestYear';'CV.TestMonth';'CV.TestDay';'CV.Tes-
tHour';'CV.TestMin';'CV.TestSek') = Date comprised of the common
variables
2.4.4.7 Type Conversion functions
2.4.4.7.1 NumberToText
Dialogfenster: Formula editor ▶ Operators/Functions
Syntax
y = NumberToText(number)
Returns the entered number as Text.
Parameters
Number
The parameter can be indicated either directly as a number or as a variable
of the type Number.